Neon Sign Installation Guide
Proper neon sign installation helps ensure secure mounting, clean presentation, and reliable performance. This neon sign installation guide covers the basic steps for wall mounting, wiring, and setup, making it easy to install your custom LED neon sign safely and correctly.
1. Standoff Screw-Mounted Neon Sign Installation Steps
Standoff mounting is the most common installation method for neon signs. It uses metal spacers and decorative caps to secure the acrylic sign slightly away from the wall. This method creates a clean, professional appearance, protects the acrylic panel from direct wall contact, and makes installation and removal more convenient.
2. Neon Sign Wiring Guide
Proper wiring helps ensure safe and reliable operation of your neon sign. This neon sign wiring guide explains the basic connection steps for the sign, dimmer, power adapter, and power cord so you can complete the setup quickly and correctly.
Instructions:
-
12V Power Supply → Neon Sign
The 12V power supply can be connected directly to the neon sign. -
12V Power Supply → Mini Dimmer → Neon Sign
The remote control requires a compatible battery to operate. This dimmer is suitable for small to medium-sized neon signs. -
12V Power Supply → Black Dimmer → Neon Sign
The remote control requires a compatible battery to operate. This dimmer is suitable for neon signs of any size. -
12V Power Supply → Black Dimmer → Two-Part Neon Sign / Large Neon Sign with Two Power Leads
This connection is suitable for neon signs divided into two sections or large neon signs with two separate power leads.
3. Wall Hanging Installation
Hang the neon sign on the wall using a chain. In most cases, only one hole is needed to install a wall hook. For a no-drill option, adhesive wall hooks can also be used on smooth surfaces and are recommended for small to medium-sized neon signs.
4. Ceiling Kit Installation
Ceiling Suspension Installation
Use ceiling suspension hardware to hang the neon sign securely from the ceiling.
1. Measure and Mark the Mounting Points
Measure the required spacing and mark the screw-hole locations on the ceiling.
2. Drill the Holes and Insert Anchors
Drill holes at the marked positions and insert suitable ceiling anchors.
3. Install the Ceiling Cable Grippers
Align each ceiling cable gripper with the mounting hole and secure it firmly with screws.
4. Hang the Neon Sign
Attach the suspension cables to the neon sign and adjust the cable length and height as needed.
5. Connect Power and Test the Sign
Connect the neon sign to the power supply, turn it on, and check that the sign is securely installed and working properly.
5. Command Picture Hanging Strips
Command Picture Hanging Strips can be used to mount a neon sign on the wall without drilling holes or damaging the wall surface.
The main limitation is that the neon sign should not exceed 15 lbs. The hanging strips may also be visible through a clear acrylic backboard.
We do not provide these strips. If you choose this installation method, you can purchase Command Picture Hanging Strips from Amazon or a local store.
